Buy Autodesk Inventor CAM software for sale

 

June Sale!

Limited time: 5% discount on all products! Ends July 1.

Buy cheap Inventor CAM as a one-time purchase: full version with no recurring fees, no mandatory cloud accounts, and complete offline access. Pay once, use forever.
Version Price
Inventor CAM Ultimate 2027 for Inventor 2027
Inventor CAM Ultimate 2026 for Inventor 2026
Inventor CAM Ultimate 2025.1 for Inventor 2025
Inventor CAM 2024.1.0 for Inventor 2024
Inventor CAM 2023.2 for Inventor 2023
Inventor CAM 2022 for Inventor 2022
Inventor CAM 2021 for Inventor 2021
Inventor CAM 2020 for Inventor 2020
Inventor HSM Ultimate 2019 Add-on for Inventor (Pro) 2017-2019
Inventor HSM Ultimate 2018 Add-on for Inventor (Pro) 2016-2018

 

What Is Autodesk Inventor CAM?

Autodesk Inventor CAM is integrated CAM software embedded directly within Autodesk Inventor. It generates toolpaths for 2.5-axis to 5-axis milling, turning, and mill-turn operations from 3D model geometry without requiring a separate CAM application — keeping the entire design-to-CNC workflow inside one environment.

Inventor HSM (High Speed Machining) was the original product name used through the 2019 release. Starting with 2020, Autodesk rebranded it as Inventor CAM. Both names refer to the same product line and share the same machining engine — all versions from 2018 through 2027 are available in this store.

  • 2.5-axis to simultaneous 5-axis milling including Adaptive Clearing roughing
  • Turning, mill-turn, and live tooling for combined lathe/milling operations
  • Toolpath associativity — updates automatically when the Inventor model changes
  • Real-time simulation and collision detection before sending G-code to the machine
  • Integrated post-processor library: FANUC, Siemens, Heidenhain, Haas, Mazak

What's Included in the Purchase

  • Full offline installer for the specified Inventor CAM version
  • Runs on Windows 10 and Windows 11 (64-bit)
  • All machining modules included: 2.5-axis milling, 4-axis, 5-axis, turning, mill-turn, simulation, post-processing
  • Integrated post-processor library for common CNC controllers
  • No internet connection required after installation
  • No Autodesk account required to run
  • Installation instructions included

Why Buy Autodesk Inventor CAM from Prosoftstore?

  • Permanent activation, one-time purchase — no subscription fees, no annual renewals
  • Full functionality included — all machining modules from 2.5-axis to 5-axis, mill-turn, and simulation at a low price
  • Offline after installation — no internet connection or Autodesk account required to run
  • Cheaper than subscription — pay once, use the version as long as needed without recurring costs

Frequently Asked Questions

What is Autodesk Inventor CAM used for?

Autodesk Inventor CAM is used to generate CNC toolpaths for milling, turning, and mill-turn operations directly inside Autodesk Inventor. It covers 2.5-axis to 5-axis milling, lathe programming, and mill-turn with live tooling — targeting CNC programmers and design engineers who machine parts in-house or work with contract manufacturers.

Does Inventor CAM require Autodesk Inventor to run?

Yes. Inventor CAM is a plugin that installs into Autodesk Inventor and requires the matching Inventor version to function. Each version listed in the table specifies its compatible Inventor version. Inventor CAM cannot run as a standalone application without Inventor installed.

What is the difference between Inventor CAM and Inventor HSM?

Inventor HSM (High Speed Machining) was the product name used through the 2019 release. Autodesk renamed it Inventor CAM starting with the 2020 release. The underlying machining engine and workflow are the same — the name change was a rebranding, not a new product. Both generations are available in this store.

Does Inventor CAM support 5-axis machining?

Yes. Inventor CAM Ultimate editions include simultaneous 5-axis machining with swarf cutting and multi-axis contour toolpaths. All versions listed in this store are Ultimate editions, so 5-axis support is included in every purchase.

Can Inventor CAM run without an internet connection?

Yes. After installation, Inventor CAM runs fully offline. No internet connection is required for normal operation, toolpath generation, simulation, or post-processing.

What CNC controllers does Inventor CAM support?

Inventor CAM includes a post-processor library covering common CNC controllers including FANUC, Siemens, Heidenhain, Haas, and Mazak. Post-processors can be customized for machine-specific output requirements.

What is the difference between Inventor CAM and Fusion 360 CAM?

Fusion 360 CAM is embedded in Autodesk Fusion 360 and requires a cloud-connected subscription workflow. Inventor CAM runs inside Autodesk Inventor as a desktop plugin with no cloud account required. Both share similar machining strategies, but Inventor CAM is aimed at users already working within the Inventor environment who need a fully offline, desktop-only CAM solution.

Is Inventor CAM good for mill-turn programming?

Yes. Inventor CAM includes dedicated mill-turn support with live tooling for programming cross-holes, flats, and milled features on turned components within a single setup. This makes it suitable for Swiss-type and mill-turn machine programming without a separate CAM package.

How to Order

  1. Place your order and complete payment
  2. Receive a download link from our FTP server
  3. Download the original installer and activation instructions
  4. Contact support if needed - we assist until the software runs on your machine

Choose your version in the table above - delivery within 1–3 hours after payment.